EJOT IT/Z 8/60 Insulation Washers — 60mm Polyamide Disc Washer with 8.2mm Internal Hole

The EJOT IT/Z 8/60 is a polyamide disc insulation washer from the EJOT fixing system, sharing the same 60mm external diameter as the IT/S 5/60 but with a larger 8.2mm internal hole — making it the correct choice for use with 8mm diameter insulation anchors and fixings rather than the 5mm fixing range.

Selecting the right washer for the fixing diameter is important — an undersized hole will prevent correct seating, while an oversized hole reduces the effective bearing area. The IT/Z 8/60 is specifically sized for 8mm fixing systems within the EJOT range, maintaining the full 60mm bearing face and consistent load distribution across the insulation board surface.

Key Features

• 60mm external diameter — wide bearing face for effective load distribution
• 8.2mm internal hole diameter — designed for 8mm insulation fixing systems
• Polyamide construction — lightweight, non-corrosive
• Part of the EJOT insulation fixing system
• Suitable for internal and external applications

Typical Applications

• Use with 8mm EJOT insulation anchors and screws in EWI systems
• Supplementary bearing face for 8mm fixing systems on insulation boards
• External wall insulation and insulated render systems

To check availability or discuss your requirements, call 0121 333 7288 or use the Enquire Now button above.

Additional Information